1. Manuals
  2. Brands
  3. Tsubaki Manuals
  4. Measuring Instruments
  5. BDTM201
  6. Operation manual

Tsubaki BDTM201 Operation Manual

Sonic belt tension meter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Sonic Belt Tension Meter
BDTM201
This manual describes operation procedure of BDTM201.
Please read this manual thoroughly before for full use of functions.
Contents
Operation Manual
P1
P3
P4
9. The installation tension table of
the TSUBAKI timing belts
P5
P7
P9
P10
P10
P11
P12
P12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BDTM201 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tsubaki BDTM201

Summary of Contents for Tsubaki BDTM201

  • Page 1: Table Of Contents

    Sonic Belt Tension Meter BDTM201 Operation Manual This manual describes operation procedure of BDTM201. Please read this manual thoroughly before for full use of functions. Contents 1. Precautions 7. Unit mass table of the preinstalled belt 2. Brief summary, caution & check 8.

  • Page 2: Precautions

    1. Precautions ■ Please read this precautions carefully. And Keep this manual safe for future reference. ■ These precautions are written to defend the user to keep other people from harm, and to prevent other damages. Please pay attention to these precautions. ■...
  • Page 3 Please turn off the power, Please measure the tensile force immediately right after you hear after confirming the machine has a thunder noise and move to a been turned off. safety place. ● Can cause an electric shock      Caution Avoid keeping at the place where Do not use solvents (thinner and much humidity, dust and high benzene, etc.) for maintenance.

  • Page 4: Brief Summary, Caution & Check Points For The Failure

    （Turn on a power with background noise keenly connected the sensor, then push "MEASURE" button after one second） ＊Please inquire to us or the dealer where you purchased if the BDTM201 does not work after checking the points above.

  • Page 5: Measurement Principle Of Bdtm201

    A measured oscillation frequency can be converted into a belt tension with the formula on the right. Thus, BDTM201 can display a more accurate tension by incorporating a correction factor obtained in calibration testing into data to be input, though it may display a higher tension than in actuality due to the rigidity of the belt under specific conditions.

  • Page 6: Explanation Of The Parts Of Bdtm201 Main Body

    4. Explanation of the parts of BDTM201 main body Sensor（Option） ● Cord type sensor Flexible arm sensor （Standard） One-touch connector OLED Span button Measure button （Decision button） Power button Width button Mass button UP/DOWN button Select button （Call button of   measured results）...
  • Page 7 ● 【Memory of measuring condition】 Select button Press SELECT button to choose any desired input number displayed in power-on.   40 memory functions selectable from No. 0 to 39   ＊To pass on, press SELECT button back to back, to jump in the number, press the wished number directly on it.

  • Page 8: Operation Procedure Of Bdtm201

    5. Operation procedure of BDTM201 Procedure Description Operation Display screen Choose an optimum sensor and fix in the main body Set up the sensor. with one-touch connector. Turn on power. POWER button − PUSH Input No. by numerical keypad or “SELECT”button − PUSH select button.
  • Page 9 Start measurement. １ Get sensor in central span of the measure object without touching it. ［After the second ２ "MEASURE" button − PUSH: LED （green） measurement, please blinks, shows notice that the screen ３ To vibrate the wire, flip the belt span with a shows the data finger etc.: shows previously measured.

  • Page 10: How To Input The Data

    6. How to input the data 6-1. How to input the unit 6-2. How to input the belt    mass（Refer to the unit width or the number of   mass tables on next page） belts（ribs） Timing belt & （Reference） Flat timing belt Timing belt &...

  • Page 11: Unit Mass Table Of The Preinstalled Belt

    HC 14M HY 14M PX 14M 8. Unit mass table of TSUBAKI tooth shape timing belt ■Table2: For BDTM201 unit mass table Data of unit mass can be input by four significant digits, i.e. three digits of integer and one digit below decimal point in g/mm W x m L from 0.1 to 999.9 g/mm W x m L.
  • Page 12 9.The installation tension table of TSUBAKI timing belts ① PX belt Unit ：N Type P14M Belt width mm Recommended 1040 1500 2110 2710 3340 Max. 1370 1310 2000 2810 3610 4450 ② PX belt water proof type Unit ：N Type...

  • Page 13: Specification Of Bdtm201

    Thank you for choosing our sonic tension meter （BDTM201） . We guarantee for one year for the main body and six months for the sensor. If our sonic tension meter （BDTM201） fails due to a manufacturing or workmanship defect during the period, we repair it free of charge.
  • Page 14 Headguarters 3-3-3 Nakanoshima, Kita-ku, Osaka 530-0005 Japan https://www.tsubakimoto.com Website The logos, brand names, or product names in this operation manual are trademarks or registered trademarks of Tsubakimoto Chain Co. in Japan and other countries.

Table of Contents