Advertisement
Quick Links
Advertisement
Related Manuals for UTILITY WAREHOUSE Wi-Fi Hub
Summary of Contents for UTILITY WAREHOUSE Wi-Fi Hub
- Page 1 UW Wi-Fi Hub Setup guide...
- Page 2 2 | UW Wi-Fi Hub setup guide...
-
Page 3: Table Of Contents
We know you want to get online quickly but please take a few minutes to read this guide. It’s full of useful information on how to setup your UW Wi-Fi Hub and get the best possible service. Contents Check... -
Page 4: Check
Hub box. Your service could go live anytime up to midnight on this date. UW Wi-Fi Hub DSL Cable Ethernet Cable (grey with grey ends) (white with yellow ends) technicolour technicolour Power Supply Wireless Settings Card Microfilter (if requested) 04 | UW Wi-Fi Hub setup guide... -
Page 5: Find
Find Your master socket Unplug any existing equipment Power from your master socket. Connecting your Wi-Fi Hub to the master socket will give you the best broadband speed. The master socket is usually slightly larger than a normal phone socket and often has a horizontal line in the middle. -
Page 6: Plug In
DSL cable Power supply Turn on the main switch and push the black on/off button on the back of the Wi-Fi Hub. A sequence of lights will come on and may take a minute or two to stabilise. Remember You’ll need to connect a filter to every telephone socket that is in use in your property. - Page 7 Connect the other end of the DSL cable into the grey socket labelled ‘DSL’ on the back of the Wi-Fi Hub. Assemble the power supply by sliding the plug into the slot on the power adapter and connect it to the Wi-Fi Hub. Pre-filtered UW Wi-Fi Hub...
-
Page 8: Connect
Just press the WPS button on the side of your Wi-Fi Hub and then press the WPS button on your wireless device to connect to the internet. -
Page 9: Help
Check that everything is connected properly. Refer to page 6 and 7 to see what your setup should look like. • Check the power light on the Wi-Fi Hub is on. If it’s not, please make sure that your power supply is plugged in properly. •... -
Page 10: Broadband Problems Solved
Broadband problems solved Status What it means The Wi-Fi Hub is ready to use and Wi-Fi Green is enabled. The Wi-Fi Hub is ready to use but Wi-Fi Blue is disabled. To turn on Wi-Fi, briefly press the Wireless button on your Wi-Fi Hub. -
Page 12: We're Here To Help
We’re here to help If you have a query, or would like assistance in setting up your UW Wi-Fi Hub, please email us at techsupport@uw.co.uk Alternatively, call Technical Support experts on either 0333 777 0555 for residential customers, or 0344 815 0040 for business customers.
Need help?
Do you have a question about the Wi-Fi Hub and is the answer not in the manual?
Questions and answers