Advertisement
If you have a pre-filtered
master socket you won't need
to use microfilters in your
property.
1.
Connect your telephone cable into the larger of the two sockets
on the pre-filtered master socket, and the DSL cable into the
smaller socket.
2.
Connect the other end of the DSL cable into the grey socket labelled
'DSL' on the back of the Wi-Fi Hub.
3.
Assemble the power supply by sliding the plug into the slot on the
power adapter and connect it to the Wi-Fi Hub.
Telephone
Turn on the main switch and push the black on/off button on the
back of the Wi-Fi Hub.
A sequence of lights will come on and may take a minute or two
to stabilise.
Pre-filtered
master socket
DSL cable
UW Wi-Fi Hub
Power supply
07
Advertisement
