Responsibilities Of The User; Intended Use Of Equipment; Cyber Security Disclaimer; Quality Certificates And Applicable Standards - ABB ACS5000 User Manual

General information on manual and equipment

Responsibilities of the user

Intended use of equipment

Cyber security disclaimer

Quality certificates and applicable standards

4 (8)
It is the responsibility of those in charge of the drive to ensure that each
person involved in the installation, operation or maintenance of the drive
has received the appropriate training and has thoroughly read and clearly
understood the instructions in this manual and the relevant safety
instructions.
Those in charge of the drive must ensure that the drive is only used as
specified in the contractual documents, operated under the conditions
stipulated in the technical specifications and on the rating plate of the
drive, and serviced in the intervals as specified by ABB.
Use of the drive outside the scope of the specifications is not permitted.
Intended equipment use also implies that only spare parts recommended
and approved by ABB must be used.
Unauthorized modifications and constructional changes of the drive are
not permitted.
This product is designed to be connected to and to communicate
information and data via a network interface. It is Customer's sole
responsibility to provide and continuously ensure a secure connection
between the product and Customer network or any other network (as the
case may be).
Customer shall establish and maintain any appropriate measures (such as
but not limited to the installation of firewalls, application of authentication
measures, encryption of data, installation of anti-virus programs, etc) to
protect the product, the network, its system and the interface against any
kind of security breaches, unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
ABB and its affiliates are not liable for damages and/or losses related to
such security breaches, any unauthorized access, interference, intrusion,
leakage and/or theft of data or information.
The following certificates and conformity declarations are available with
ABB:
■ ISO 9001 / ISO 14001 certificates stating that ABB Switzerland Ltd
has implemented and maintains a management system that fulfills
the requirements of the normative standards
■ EC declaration of conformity
■ List of the standards the drive complies with
3BHS221906 ZAB E01 Rev. D
ABB
5k A UM