Polaris RANGER 570 Full-Size Sport 2022 Owner's Manual page 108

Table of Contents

Advertisement

MAINTENANCE
FRONT GEARCASE (DEMAND DRIVE)
Always check and change the demand drive fluid at the intervals outlined in the
Periodic Maintenance Chart. Maintain the oil level even with the bottom thread
of the fill plug hole. Refer to the Gearcase Specifications Chart for
recommended lubricants, capacities and torque specifications.
ADC Models: Change the front gearcase fluid every 25 hours if the ADC unit is
exposed to extreme use. Extreme use includes any of the following:
• Operation in ADC mode for prolonged periods.
• Constant ADC operation on hilly or mountainous terrain.
• ADC is the primary mode of all-wheel-drive operation.
If the front gearcase makes excessive noise during ADC operation, change the
demand drive fluid. If the noise continues, please see your dealer or other
OIL CHECK
The front gearcase fill plug
1. Position the vehicle on a level
surface.
2. Remove the fill plug
oil level.
3. Add the recommended oil as
needed.
4. Reinstall the fill plug. Torque to
specification.
OIL CHANGE
1. Support the vehicle securely with a jackstand.
2. Remove the front tire on the driver's side.
3. Remove the fill plug.
4. Place a drain pan under the drain plug
5. Remove the drain plug. Drain the oil.
6. Clean and reinstall the drain plug. Torque to specification.
7. Add the recommended fluid to the bottom of the fill plug hole. Do not overfill.
8. Reinstall the fill plug. Torque to specification.
106
TIP
qualified service person for service.
q
is located on the right side of the front gearcase.
q
. Check the
w
on the bottom right-hand side.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ranger crew 570 full-size sport 2022

Table of Contents