Measurements And Adjustments; When Replacing The Mechanism Unit And/Or Digital P.c.b. Unit - Panasonic SA-BTT785GN Service Manual

13

Measurements and Adjustments

13.1.

When Replacing the Mechanism Unit and/or Digital P.C.B. Unit

When replacing the mechanism unit, Digital P.C.B. Unit or both, the drive adjustment is required. The adjustment is performs
reading QR coded adjustment value by web camera and writing the value to Digital P.C.B. Unit.
There are 2 method for adjustment value writing:
(1) Using PC: "Using PC Method"
Set the adjustment value to memory on the Digital P.C.B.Unit using writing software on PC.
(2) Using Remote Control (supplied with the unit):
Set the adjustment value to memory on the Digital P.C.B.Unit using the Remote Control.
13.1.1. List of Service Tools
13.1.1.1. Adjustment/Inspection Tools for Using PC method
No. Part No.
Serial Card (PC - Main Unit)
1 RFKZ0139
(for using PC method)
Conversion Cable (6P - 4P Connector)
2 RFKZ0602
(for using PC method)
*The above parts are supplied by AVC-CSC-SPC.
13.1.1.2. Commercial Tools Required for both methods
No. Part No.
1 - PC
Web camera
(For reading the QR code label pasted to the
back of the mechanism unit)
Recommended Web camera:
Logitech Webcam C200
(The same camera as using to read QR code
of Mountbox unit for DSLM(Digital Single Lens
Mirrorless)
2 -
13.1.1.3.Preparation
Before starting the adjustment, install the software for adjustment (QR code reading software for Web camera and the
software for the code writing to Digital P.C.B.).
Note:
The adjustment software can be downloaded from "Support Information from NWBG/VDBG-AVC" web-site in"TSN
system",together with instructions of "Adjustment Software" including preparations and connections etc.
Uses
Uses
39
"Using Remote Control Method".
Pcs
1 Same as previous model
1 Same as previous model
Pcs
1
• Web camera of 300,000 pixels or more
that closeup photography is possible up to
several centimeters (It is enough usually by
300,000 pixels).
The focus function recommends manual.
• It recognizes it automatically only by the
connection to PC.
Web Camera for USB video class (UVC) that
doesn't need special device driver.
A lot of marketed commodities correspond to
1
the USB video class.
Compatibility
Compatibility
-