2.3 Two-ways Connect Camera 2. Connect camera 1) Use POE Switch for power supply 2) Use Power Adapter for power supply The router must be able to connect to the Internet! Please use the standard power supply. Note: 2.2 Connect LAN cable and power to camera, it needs about This is a POE(Power Over Ethernet) Camera: one minute to self checking and then start working.
3.1 Download “CamHipro” from Google Play (Android Phone) / App Store(iPhone) or scan the QR code below to get APP information. 5. Click “Connected network cable” to search for devices 6.Click the camera on the same network 4. Click “Power is on, you want to add next step”...
3.3 Add a sharing device. 4.Set Micro SD Card Recording Share camera, please click “Add a sharing device” to scan camera UID QR code, then you can add the camera on a 4.1 SD Card Setting and Alarm Setting different device. 3.
Page 6
✲ Open “Alarm capture sent to Email” if you need Email alert with pictures, click “Configure Email” to complete Email settings, for more detailed settings, please refer to the instruction on SV3C website or contact SV3C customer service. ✲ Open “Alarm recording to FTP” and “Alarm capture saved to FTP”...
IP Address keep Fixed. If you want to reset factory about your cameras, just pls restart or reset the camera via mobile phone or PC. Please download PC software on SV3C website: www.sv3c.com...
Page 8
2.You can select Fixed or camera quickly, For detailed instructions and video Dynamic ip address 1.Login IE browser by using camera ip address. tutorials please refer to SV3C www.sv3c.com Enter “Network” page If you want to customize This manual may have descriptions and operations...
Need help?
Do you have a question about the POE HX Series and is the answer not in the manual?
Questions and answers