Watching Images From Hdmi/Composite Input; Setting Picture Adjustment - Hitachi UltraVision UT32V502 Operating Manual

SETUP OPERATION (continued)

Watching Images from HDMI/Composite Input

1. Connect to external equipment. (See
2. Press the
or
Press the or
3. Press the
button.

Setting Picture Adjustment

You can adjust the display condition such as color settings.
Select "Picture" from Menu list.
Picture
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Back Light
Reset
Select OK Set
Selected Items
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Back Light
Reset
33
18 and
button to switch to HDMI mode.
button to switch to Composite mode.
Dynamic
+31
–31
0
+15
0
Normal
+20
Reset
Return
Dynamic
Cinema
-31~+31
(+32~+40)
-31~+31
-31~+31
-15~+15
-31~+31
-20~+20
19 for details.)
Picture Dynamic
Contrast Mode Normal
3D Color Management Off
Black Enhancement Off
DNR Off
MPEG NR Off
Film Mode Off
3D Comb Filter Off
Reset Reset
Select OK Set Return
You can make the best selection from 3 modes depending
on the lighting condition and intended use.
Natural Dynamic: Suitable for brighter conditions.
Natural : Suitable for normal lighting conditions.
Cinema : Suitable for watching movies.
This adjusts the contrast to meet the surrounding
brightness by using the
The maximum value is extended up to [+40] by pressing
the button for more than 2 seconds at [+31]. The
value between [+32] ~ [+40] appears in magenta. This is
the special feature for dark images, so it is recommended
to set the value less than [+31] under normal conditions.
Adjust brightness according to personal preference by
using the
◄►
Adjust color according to personal preference by using the
button.
◄►
Preferred sharpness can be adjusted by pressing the
button for softer image or the
Pressing the
while pressing the
green. The setup hint is to adjust for realistic skin color.
Cool
You can select from 3 settings depending on the color
condition using the
Normal
Warm
Adjust the brightness of the Back Light for maximum
visibility.
Each item on this menu screen can be restored to the
factory settings by pressing the
Picture
Color Temp. Adjust
Motion Sharpness
Select
Setup hint
button.
◄►
button.
button for sharper image.
button enhances red and weakens green,
button weakens red and enhances
button.
◄►
button.
OK
Dynamic
On
OK Set Return