Freeze Function; Troubleshooting; Customer Service - Philips MELICONI Quick Start Manual

After setting the remote control can be locked to prevent the user to change its configuration.
Operate as follows:
• Press and hold on the MELICONI remote control for at least 6 seconds the
[ ] [ ]
and AV
ON/OFF
• When the indicator light flashes, release and press for a moment the P + button.
• Three final flashes indicate that the operation has been completed successfully.
To UNLOCK the remote perform the procedure using the P – button.
Most problems are caused by using insufficiently charged batteries.
We recommend checking them and, if necessary, replace them as shown in the INSERTING THE
BATTERIES chapter.
● IF THE REMOTE CONTROL IS NEW AND YOU CAN NOT MAKE IT WORK
Check that you have carried out all the settings procedures correctly. If necessary repeat them, following all the steps
indicated carefully.
● IF THE REMOTE CONTROL STOPS WORKING
Remove the batteries, press a few buttons and insert NEW batteries. Make sure that the remote control is pointing at the
device without any obstacles between them.
● IF SOME FUNCTIONS ARE NOT AVAILABLE ON THE REMOTE CONTROL
Referer to chapter BUTTON AND FUNCTIONS USE to perform the intended function. See also section CONFIGURATION.
● HOW TO CHECK IF THE REMOTE CONTROL SENDS INFRARED SIGNALS
The human eye is not able to detect infrared signals; use a camera (even that of the mobile phone).
Aim the infrared LED located in front of the remote control (not the red LED above) and press and hold on the remote control
[ ]
the ON/OFF button.
If you see through the camera, the LED light with short white / light blue flashes means that the remote control works and
emits infrared.
Consult the
www.meliconi.com/guide
IMPORTANT! When contacting technical support it is INDISPENSABLE that you communicate the BRAND and
MODEL of the device that you want to control and which MELICONI remote control you are using.
To contact an operator to call number +39 02 66012766 or send an e-mail to:
WARRANTY: 2 year
Always keep your sales receipt as proof of the validity of the product's warranty. The warranty is voided if the product is
tampered with or used improperly.
For instructions in further languages, please connect to

FREEZE FUNCTION

buttons simultaneously.

TROUBLESHOOTING

ATTENTION!

CUSTOMER SERVICE

website for more detailed information on the product.
telecomandi@meliconi.com
www.meliconi.com/hotel03
11