Table Of Contents - Viking DGVU200 Installation Manual

Table of Contents

Warnings & Important Safety Instructions _______________________________________________3
Dimensions (30") ____________________________________________________________________6
Dimensions (36") ____________________________________________________________________7
Specifications _______________________________________________________________________8
Cutout Dimensions __________________________________________________________________9
Downdraft Dimensions ______________________________________________________________9
Clearance Dimensions (Proximity to Cabinets)__________________________________________10
Clearance Dimensions (Wood/Composite or Steel Overlay) ______________________________11
Electrical & Gas Requirements _______________________________________________________12
General Information ________________________________________________________________16
Installation _________________________________________________________________________17
LP Conversion __________________________________________________________________18
LP Pressure Regulator Conversion_________________________________________________19
Natural Gas Conversion _________________________________________________________20
Natural Gas Regulator Conversion ________________________________________________21
Gas & Electrical Connection ______________________________________________________22
Bracket Installation ______________________________________________________________22
Final Installation ________________________________________________________________22
Final Preparation ___________________________________________________________________24
Performance Checklist ______________________________________________________________24
Service & Registration _______________________________________________________________25
DANGER
FIRE/EXPLOSION
HAZARD
IF THE INFORMATION IN
THIS MANUAL IS NOT
FOLLOWED EXACTLY, A FIRE OR
EXPLOSION MAY RESULT CAUSING
PROPERTY DAMAGE, PERSONAL
INJURY, OR DEATH.
• DO NOT store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
• WHAT TO DO IF YOU SMELL GAS: -DO NOT try to light any appliance.
-DO NOT touch any electrical switch.
-DO NOT use any phone in your
building.
-Immediately call your gas supplier
from a neighbor's phone.
-Follow the gas supplier's instructions.
-If you cannot reach your gas supplier,
call the fire department.
• Installation and service must be
performed by a qualified installer,
service agency, or the gas supplier.
2
All manuals and user guides at all-guides.com
IMPORTANT -
Please Read and ollow
• Before beginning, read these instructions
thoroughly and carefully.
• Installation and service must be
performed by a qualified installer, service
agency, or the gas supplier.
• DO NOT remove permanently affixed
labels, warnings, or plates from the
product as this may void the warranty.
• Observe all local and national codes,
requirements and ordinances.
• Installation must conform with local codes
or in the absence of codes, the National
Fuel Gas Code, ANSI Z223.1- latest
edition and the National Electrical Code,
ANSI/NFPA 70- latest edition.
In Canada: Installation must be in
accordance with the current CAN/CGA
B149.1 & 2 Gas Installation codes and with
the current CSA C22.1 Canadian Electrical
Codes Part 1 and/or local codes.
• Installation of any gas-fired equipment
should be made by a licensed plumber.
• A manual gas shut-off valve must be
installed in the gas supply line ahead of
the cooktop in the gas stream for safety
and ease of service.
In Massachusetts: This appliance must be
installed by a licensed plumber or gas-fitter.
A "T" handle manual gas valve must be
installed in the gas supply line to the
appliance.
• Installers should leave these instructions
with the consumer who should retain them
for the local inspector's use and for future
reference.
3
Your safety and the safety of others is
very important.
We have provided many important safety
messages in this manual and on your
appliance. ALWAYS read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be preceded by
the safety alert symbol and the word
"DANGER," "WARNING" or "CAUTION."
These words mean:
DANGER
Hazards or unsafe practices
which WILL result in severe personal
injury or death
WARNING
Hazards or unsafe practices
which COULD result in severe personal
injury or death
CAUTION
Hazards or unsafe practices which
COULD result in minor personal injury
or property damage.
All safety messages will identify the
hazard, tell you how to reduce the chance
of injury, and tell you what can happen if
the instructions are not followed.