Lp Conversion; Lp Pressure Regulator Conversion - Viking DGVU200 Installation Manual

LP Conversion

WARNING
LP conversion should only be performed
by a qualified service technician
2
2
2
2
2
1
Remove injectors using a 9/32" nut driver.
4
1
1
1
1
2
Install and tighten injectors.
18
All manuals and user guides at all-guides.com
1
Remove aluminum gas spreaders.
3
60 105
115 90
90
60 105
105
115
Reference chart to determine which injectors are
needed for each burner.
5
Replace aluminum flame spreaders.

LP Pressure Regulator Conversion

1
Disconnect electrical power and shut off gas.
3
Unscrew the plastic conversion plug from the cap
and turn over. Screw plug back into cap with the wide
section away from cap.
5
Test gas pressure. When converting the regulator for different
settings, the function of the regulator must be checked at a pressure at
least 1" WC (249Pa) above the specified manifold pressure.
2
2
Unscrew regulator cap.
4
1
Replace regulator cap.
19