Table of Contents
Advertisement
III. NORMAL OPERATION MINIBUMP SOURCE
The instrument is designed to generate gas for approximately 36 seconds
per bump test. Each source will provide up to 1000 tests. The
MiniBump will generate gas until either the battery becomes discharged
or the source is consumed. If either condition occurs, a RED LED will light,
indicating a non- normal condition (refer to the Non-Normal Operation
section that follows.)
The calibration gas is delivered through a small flexible hose attached to
the source manifold cap. The hose is placed over, around or in front of the
gas sensor. Alternatively, the detector can be placed directly in front of
the outlet fitting allowing the gas to be presented directly to the detector.
8
Advertisement
Table of Contents
