Standard Warranty - ACD MiniBump Instruction Manual

X. STANDARD WARRANTY
We warrant gas calibration equipment manufactured and sold by us to be
free from defects in materials, workmanship and performance for a period
of one year from date of shipment. Any parts found defective within that
period will be repaired or replaced, at our option, free of charge, F.O.B.
factory. This warranty does not apply to those items which by their nature
are subject to deterioration or consumption in normal service, and which
must be cleaned, repaired, or replaced on a routine basis.
Such items may include:
a. Electrochemical type generating sources
b. Batteries
Warranty is voided by abuse including rough handling, mechanical
damage, alteration, or repair procedures not in accordance with the
instruction manual. This warranty indicates the full extent of our
liability, and we are not responsible for removal or replacement cost,
local repair costs, transportation costs or contingent expenses
incurred without our prior approval.
Advanced Calibration Designs, Inc.'s obligation under this warranty shall be
limited to repairing or replacing, and returning any product which shall be
returned to Advanced Calibration Designs, Inc. at its manufacturing facilities,
with transportation charges prepaid, and which Advanced Calibration
Designs, Inc.'s Material Review Board examination shall disclose to its
satisfaction to have been defective.
This warranty is expressed in lieu of any and all other warranties and
representations, expressed or implied, and all other obligations or liabilities
on the part of Advanced Calibration Designs, Inc. including, but not limited
to, the warranty of fitness for a particular purpose. In no event shall
Advanced Calibration Designs, Inc. be liable for direct, incidental or
consequential loss or damage of any kind connected with the use of its
products or failure of its products to function or operate properly.
The following is a listing of the available electrochemical MiniBump
sources and their standard warranty when installed in equipment
manufactured and supplied by Advanced Calibration Designs, Inc.
Chlorine, Hydrogen, Hydrogen Sulfide, Hydrogen Cyanide:
One year or 250 tests.
16