Admin (Administration); Change Password; Reboot/Reset This Device; Upgrade System Firmware - Hawking HWBA54G User Manual

Admin (Administration)

In this Administration page, you can

Change password.

The device has no password at default. It is recommended that you set a
password to ensure that no one can adjust the device's settings;
To set/change password:
1. Enter your password in the first password box.
2. Enter the password again in the next box to confirm.
3. Click SAVE to save the setting.

Reboot/Reset this device.

Reboot: the device will re-boot itself and while still keep your
original settings. You will probably do this if problems occur with
this access point.
Reset, the device will reset itself to the factory default settings.
(Note that all your original settings will be replaced by factory
default settings.)

Upgrade system firmware.

- 20 -