Temperature Display; Pressure Display; Setting The Alarm - NexxTech Professional Weather Station User Manual

5. Languages (7), English (EN), German (GE), Italian (IT), French
(FR), Dutch (NE), Spanish (ES), Danish (DA)
6. Hour Format 12 or 24 hour
7. Hour
8. Minutes
9. DST On or Off
Note:
1. When the minute value is edited; the seconds value is
reset to 00.
2. If no buttons are pressed within 8 seconds, it will exit the
manual time set mode.

TEMpERATURE DISpLAy

Press DOWN to toggle the temperature display between
Celsius and Fahrenheit

pRESSURE DISpLAy

Press UP to toggle the pressure display between mb/Hpa
and inHg.

SETTINg ThE ALARM

Press ALARM button to view the current time, alarm1 time or
alarm2. In alarm1 display, press ALARM button for 2 seconds
until the alarm1 hour flashes. Press + or - to increase or
decrease the alarm hour. Press ALARM to confirm the
alarm1 hour. The alarm1 minute display flash. Press + or - to
increease or decrease the alarm minute. Press ALARM to
confirm the alarm1 time setting.
For alarm2 setting, press ALARM button until alarm2 is
display. Repeat the above alarm setting procedure.
Note: If no buttons are pressed within 8 seconds, it will exit
the alarm time set mode.
17