Time, Date And Alarm Display Mode; Manual Setting Of Date, Time - NexxTech Professional Weather Station User Manual

• During radio reception, press the -/RCC button will stop the
radio reception.
• The atomic clock will automatically receive the WWVB time
code during the middle of the night. The signal is automatically
sent at intervals at 2:03 am, 3:03 am and 4:03 am.
Note: The radio controlled signal for time (WWVB 60 KHz) is
transmitted from the WWVB radio station derives its signal
from the NIST Atomic clock in Boulder, Colorado.
It has a reception range of approximately 3,218 kms (2000
miles). Obstructions such as concrete walls can reduce the
signal range.

TIME, DATE AND ALARM DISpLAy MODE

The main unit receives and displays together with the time and the
date. Press MODE for the following:
• Press TIME to change the display between the calendar
year or calendar day of week.
• Press ALARM button to switch between time, alarm1 or
alarm2.
• Press the +/HR button to switch among the time zone in the
sequence as the following:
Pacific Time (P) → Mountain Time (M)→ Central Time (C)→
Eastern Time (E)→ P.

MANUAL SETTINg OF DATE, TIME

Press TIME button for 2 seconds the setting values to be
changed begins to flash. Use the + button to increase and the
- button to decrease the value. If the values are not numerical
the + and - button will offer other possibilities. The sequence of
the values to be set are the following:
1. Calendar Year
2. Sequence of Date (Month/Day or Day/Month) Display
3. Month
4. Day
16