Advertisement
8
model no. 040-1196-2
Insert the two wheel trays (driver side) (F) and
7
the two wheel trays (passenger side) (G) on to
each end of the wheel tray load bars (D).
8
Rotate the hand knob (21) clockwise on each
wheel tray to secure the trays in place.
Note: Rotate counter-clockwise to loosen the
wheel trays for adjustment.
Note: This bike carrier can be fitted to vehicles equipped with a 1 1/4" (3.2 cm) or 2" (5 cm)
hitch
receiver.
• Follow steps 9 to 11 for fitting the bike carrier to a
• Follow steps 12 to 15
for fitting the bike carrier to a
F
F
G
D
G
21
2" (5 cm) hitch receiver.
1 1/4" (3.2 cm) hitch receiver.
STINGER INSTALLATION FOR 2" (5 cm) HITCH RECEIVER
Insert the 2" (5 cm) receiver adaptor (7) of the
9
stinger base (B) into the 2" (5 cm) hitch receiver of
the vehicle.
10
Insert the anti-sway hitch pin (H) into the
aligned holes of the 2" (5 cm) receiver
adaptor and hitch receiver using a
spring
washer (P) and flat washer (R).
Tighten the anti-sway hitch pin (H) using a
3/4"
11
(19 mm) socket wrench and secure it using the
hitch pin lock (I).
Note: Use key (J) to remove the lock.
9
B
99
7
R
H
P
J
I
H
Advertisement
