Table of Contents
Advertisement
Cleaning, Maintenance, and
Lubrication
Note: These procedures are in addition to
the regular checks and maintenance
explained as part of the regular
operation of the air-operated tool.
1.
Daily - Air Supply Maintenance:
Every day, perform maintenance
on the air supply according to
the component manufacturers'
instructions. The lubricator's oil
level needs to be maintained and
the moisture filter must be regularly
drained. Performing routine
maintenance on the air supply
will allow the tool to operate more
efficiently and will also reduce wear
on the tool.
SKU 92359
For technical questions, please call 1-800-444-3353.
Clearing Jams
FROM ACCIDENTAL
OPERATION, BEFORE ANY
MAINTENANCE OR REPAIRS
ARE DONE (including clearing
jams):
• Wear ANSI-approved safety
goggles with side shields.
Other people in the work area
must also wear ANSI-approved
impact safety goggles with side
shields.
• Release the trigger.
• Detach the air supply.
• Attempt to fire Tool into piece
of scrap wood to ensure that
it is incapable of firing any
fasteners.
• Empty Canister and leave it
open during service.
1.
Occasionally a nail may become
jammed in the firing mechanism of
Nailer, making the tool inoperable.
2.
To remove a jammed nail, disconnect
Nailer from its compressed air supply.
Attempt to fire the Roofing Nailer
into a piece of scrap wood to ensure
it is disconnected. Remove the
Nails form the Nail Canister (82) and
discharge any possible trapped air.
3.
Remove and discard all jammed/
damaged nails from the nailer.
Detach and discard all damaged or
improperly collated nails from the coil.
Examine the nailer for any broken,
worn or damaged parts. If any part
appears damaged or worn, have the
tool repaired by a qualified service
technician.
TO PREVENT
SERIOUS INJURY
Page 14
Hide quick links:
Advertisement
Table of Contents
