Checking And Filling Fuel - Greyhound 97964 Set Up And Operating Instructions Manual

FIGuRE B
dIPSTIcK
(48)
1. Remove the Dipstick and wipe it off
with a clean rag. (See Figure B.)
2. Reinsert the Dipstick completely and
remove it to check the oil level. The
oil level should be between the high
and low marks on the Dipstick.
(See Figure c.)
3. If the oil level is below the low mark
add the appropriate type of oil until
the oil level is between the high and
the low marks.
Oil type:
32° F or above = SAE 30W
Below 32° F = SAE 5W-30
SKU 97964 For technical questions, please call 1-800-444-3353.
FIGuRE c
dIPSTIcK
(48)
4. Replace the Oil Dipstick.
(See Figure B.)
cAuTION! Do not run the Engine with too
little or too much oil. The Engine will
be permanently damaged.

checking and Filling Fuel

wARNING! TO PREVENT
SERIOuS INjuRY FROM
FIRE:
Fill the Fuel Tank in a well-ven-
tilated area away from ignition sourc-
es. Do not smoke.
FIGuRE d
FuEL TANK
(96)
1. To fill the Fuel Tank (96), first wipe off
the Fuel Tank Cap (96) and the sur-
rounding area. (See Figure d.)
2. Unscrew, and remove the Fuel Tank
Cap (96). (See Figure d.)
3. Mix fuel stabilizer (not included) with
89 octane (or better) unleaded gaso-
line according to fuel stabilizer direc-
tions.
4. Fill the Fuel Tank (96) to about 1 inch
under the fill neck of the Fuel Tank
with the stabilized unleaded gasoline
mixture. (See Figure d.)
5. Then replace the Fuel Tank Cap (96).
(See Figure d.)
FuEL TANK FILTER
(96)
FuEL TANK cAP
(96)
Page 8