Do you have a question about the Router AX3200 and is the answer not in the manual?
Questions and answers
Марат
February 23, 2025
Здравствуйте, у меня на роутере часто загорается индикатор жёлтым цветом, как будто нет интернета, провайдер проверял, интернет идёт но слабый, потом он опять загорается синим цветом и нормально всё, чтобы это могло быть?
1 comments:
Mr. Anderson
February 23, 2025
A yellow (orange) internet indicator light on the Xiaomi Router AX3200 means that the WAN port is connected, but the upper-level network has not been detected.
How to Use Read this manual carefully before use, and retain it for future reference. Connecting the Cables Power on the router, then use the included network cable to connect the blue WAN port on the back of the router to the LAN port of the broadband modem.
Page 3
Follow the instructions on the page to complete the configuration process. router.miwifi.com Thank you for using Xiaomi Router Start * If the configuration page is not present, open the browser and go to router.miwifi.com to complete the configuration.
Page 4
Managing by Mi Home/Xiaomi Home App It is recommended to use the Mi Home/Xiaomi Home app to manage routers for a be er experience. Connect the phone with the router's Wi-Fi, then open the Mi Home/Xiaomi Home app. Sign in to your Mi account and follow the on-screen instructions to pair.
Xiaomi Mesh function* to realize the networking. Follow the steps below to configure the network. * Please go to www.mi.com/global to check the product model and version of the routers that support the Xiaomi Mesh function. Method 1 (recommended): Open the Mi Home/Xiaomi Home app, and enter the "Mesh...
Page 6
Method 2: 1. Reset the satellite router to the factory se ings, and then power it on. To avoid mutual interference, place two routers near each other but keep the distance between them greater than one meter so that the network can be configured successfully.
Page 7
Method 3: 1. Reset the satellite router to the factory se ings, and then power it on. Wait for the satellite router's system indicator to turn blue or white (the indicator's color depends on the specific model). 2. Connect the network cable to the satellite router's WAN port and the main router's LAN port, then the Internet indicator will begin to blink quickly (two blinks per second), indicating the Mesh networking starts.
Indicator Status System Internet Internet Indicator System Indicator Internet Indicator No network cable connected to the WAN port On: The WAN port has been connected to the network Orange cable, but the upper-level network has an error. On: The WAN port has been connected to the network cable, and the upper-level network is working normally.
Page 9
1. Why can't I access the Internet a er configuring the network? Step 1: Use your phone to search for the Wi-Fi that is configured by the router. If you cannot find the Wi-Fi, make sure the router is powered on and starts working. Step 2: Connect the phone to the router's Wi-Fi and go to router.miwifi.com.
Page 10
Wi-Fi 2412 MHz–2472 MHz (≤20 dBm), 5150 MHz–5250 MHz (≤23 dBm) Hereby, Xiaomi Communications Co., Ltd. declares that the radio equipment type RB01 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: h p://www.mi.com/global/service/support/declaration.html...
Page 11
Warning: To comply with CE RF exposure requirements, the device must be installed and operated 20cm (8 inches) or more between the product and all person’s body. This device is restricted to indoor use only when operating in 5150-5250MHz frequency range in following countries:...
Need help?
Do you have a question about the Router AX3200 and is the answer not in the manual?
Questions and answers
Здравствуйте, у меня на роутере часто загорается индикатор жёлтым цветом, как будто нет интернета, провайдер проверял, интернет идёт но слабый, потом он опять загорается синим цветом и нормально всё, чтобы это могло быть?
A yellow (orange) internet indicator light on the Xiaomi Router AX3200 means that the WAN port is connected, but the upper-level network has not been detected.
This answer is automatically generated