Troubleshooting - Scheppach TIGER 2000S Translation Of Original Instruction Manual

15. Troubleshooting

Problem
Engine does not run.
The engine starts slowly
and does not reach the
operating speed.
Engine producing
excessive noise.
Engine does not reach
full power.
Motor overheats easily. Overloading of the engine,
Possible cause
Engine, cable or connector
defective, fuses burnt.
Voltage too low, coils damaged,
capacitor burnt.
Coils damaged, motor defective.
Circuits in the network are overloaded
(lamps, other engines, etc.)
insufficient cooling of the engine.
www.scheppach.com
Remedy
Have the machine checked by a specialist. Never
repair the engine yourself. Attention! Check the
fuses and replace them if necessary.
Have the power supply company check the
voltage. Have the engine checked by a specialist.
Have the capacitor replaced by a specialist.
Have the engine checked by a specialist.
Do not use any other devices or engines on the
same circuit.
Avoid overloading the engine during grinding and
remove dust from the engine to ensure optimum
engine cooling.
GB | 29