Dvd Setup; Dtv Setup - Haier TFT-LCD Owner's Manual

External Equipment Connections

DVD setup

How to connect
1
. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on
the TV, as shown in the figure.
2
. If your DVD only has an S-Video output
jack, connect this to the S-VIDEO input on
the TV and Connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as
shown in the figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1
. Turn on the DVD player, insert a DVD.
2
. Use the S-Video button on the remote
control to select S-VIDEO mode.
3
.
Press Play button on external equipment
for program play.
4
. Refer to the DVD player's manual for
operating instructions.

DTV setup

-To watch digitally broadcast programs,
purchase and connect a digital set-top box.
How to connect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGA or DVI port for
video connections, depending on your set-
top box connections available. Then, make
the corresponding audio connections.
How to use
1
. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2
. Use YUV on the remote control to select
YUV (Y, Pb/Cb, Pr/Cr) mode.
3
.
Press Play button on external
equipment for program play.
10
COMPONENT IN
Pr/Cr Pb/Cb Y L AUDIO
VGA IN COMPONENT IN
VGA AUDIO Pr/Cr Pb/Cb
or
R L
RGB-DTV OUTPUT AUDEO
Y Pb
Digital Set-top Box
AV IN
R VIDEO S-VIDEO L AUDIO
or
DVD
DVI IN
Y L AUDIO R DVI
or
DVI-DTV OUTPUT
R AUDEO
Pr
R
AUDIO
R AUDEO L