Dvd Setup; Hdmi Or Dvi Setup - Haier P60A11-AK Owner's Manual

External Equipment Connections

DVD Setup

How to connect
1
. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
input jacks on the TV and connect the DVD
audio outputs to the AUDIO jacks on the TV,
as shown in the figure.
2
. If your DVD only has an S-Video output jack,
connect this to the S-VIDEO input on the TV
and Connect the DVD audio outputs to the AV IN
jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1
. Turn on the DVD player, insert a DVD.
2
. Use the S-Video button on the remote
control to select S-VIDEO or YPbPr/YCbCr
mode.
3
.
Press Play button on external equipment
for program play.
4
. Refer to the DVD player's manual for
operating instructions.

HDMI or DVI Setup

-To watch digitally broadcast programs,
purchase and connect a digital set-top
box.
How to connect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGA or HDMI port for
video connections, depending on your
set-top box connections available.
Then, make the corresponding audio
connections.
How to use
1
. Turn on the digital set-top box.
(Refer to the owner`s manual for the digital set-top box.)
2
. Use TV/AV on the remote control to select VGA or HDMI
(Y, Pb/Cb, Pr/Cr) mode.
3
.
Press Play button on external equipment for program play.
10
Y PbPr CbCr L AUDIO R
IN
or
DVD
IN1 IN2
Y
HDMI/DVI VIDEO
VGA IN
AV OUT
VIDEO L AUDIO R
S-VIDEO IN
AV1 IN
AV OUT
PbCb CbCr L AUDIO R VIDEO L AUDIO R
AV IN