Haier TFT-LCD Owner's Manual page 37

Stream media broadcast system
Stream media system setup
Note: Memory cards or USB devices are not
supplied with this TV.
USB setup
1 Insert USB in the card slots at the right side the TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter
the stream media system.
CARD setup
This TV is Compatible with the card of SD/MMC/CF/MS/SM
format.
How to use
1
Jack of card
Jack of SM card
2
Insert the card as right direction. As following Card in common use
1 CF card
jack
C F
OMPACT LASH
DIGITAL MEMORY CARD
128
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.
34
Instructions
Jacks of SD MMC MS card
Jack of CF card
2 MMC card
jack
M M
ULTI EDIA
CARD
128
Note
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
Jack 1
2.Card reader in 1 cannot
Jack 2
simultaneously insert two kind
of cards in the graphical
representation position
3 MS card
4 SM card
jack
ID
128MB
AAA Multimedia Player
Card
USB
File copy
SETUP
Remove USB
Press ENTER key to play this devices
jack jack
SD
128MB
card