Table of Contents
Advertisement
Quick Links
Important Safety Instructions
READ AND SAVE THESE INSTRUCTIONS. This manual will help you to understand, use and
maintain your unit. To reduce the risk of fire or electric shock, do not use this fan with any solid-state
speed control device.
The Cleanaire D2000 System is a UL certified product. For your safety, please read and adhere to the
following precautions:
1. Always unplug the unit prior to moving. Keep the unit unplugged during periods of prolonged
inactivity.
2. If water does enter the unit or the unit is immersed in water, do not turn the unit on. Failure to
follow this procedure MAY RESULT IN ELECTROCUTION.
Note: The water in the unit would likely cause permanent damage to the unit.
3. The unit will not operate if either the top or the front grill is opened. This is a built-in safety
feature. After changing the filter or UV lamp, make sure that the grill is correctly reinstalled.
4. Check the power cord to make sure there is no sign of damage prior to use.
5. Always place the unit on a flat surface. Do not place the unit too close to a heat source such as
stoves, radiators, or any other heating devices.
Operation Instructions
Placement of the Unit
In order to obtain the maximum performance, place your unit in a location that will not
restrict airflow through either the air inlet or the air outlet.
Function Keys Operation
Power on and off
1.
Press POWER button to turn on the unit. This will turn on the control panel lights as well
as the ultraviolet lamp. If you do not want to use the UV Light, you can remove the bulb.
SERVICE NOW
☉
SERVICE SOON
☉
OK
☉
LAMP RESET FILTER
◎
◎
S
S
E
E
R
R
V
V
2.
Look into the air outlet at the top of the cabinet and confirm that the ultraviolet lamp is
operating. You will see a blue glow when the lamp is on. If the lamp appears to be off,
make sure the top and front grills are properly secured.
Set Room Size
Estimate your room size and set your choice accordingly. The following information
should be used as a guide when selecting your room size:
Quick User's Manual
☉
● X-LARGE
● LARGE
● MEDIUM
☉
● SMALL
● X-SMALL
☉
◎
I
I
C
C
E
E
I
I
N
N
F
F
A
I
R
P
U
R
I
F
A
I
R
P
U
R
I
F
SELECT
O
O
R
R
M
M
A
A
T
T
I
I
O
O
N
N
I
E
R
I
E
R
Power
● SUPER
● ECONOMY
● SLEEP
SELECT
M
M
O
O
D
D
E
E
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clean Air D2000
Summary of Contents for Clean Air D2000
- Page 1 To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device. The Cleanaire D2000 System is a UL certified product. For your safety, please read and adhere to the following precautions: 1.
- Page 2 X-LARGE up to 1,000 square foot room ● SUPER LARGE approx. 500 square foot room ● ECONOMY MEDIUM approx. 400 square foot room SMALL approx. 300 square foot room ● SLEEP X-SMALL approx. 200 square foot room SELECT Select Operation Mode MODE They are three settings for fan speed: 1.
- Page 3 UV Lamp 1). Insert the new UV lamp (part # D2000L) in place and lock in by rotating one-quarter turn rear-to-top. 2). Reinstall the grill. The aluminum reflector must be positioned over the lamp, nearest the front of the unit. The angled section of the aluminum reflector will be facing the back of the unit.
- Page 4 Pull out the two filters, individually, clean and vacuum or discard them. 2. Install the Second-Stage filter (part # D2000HFC) in lower slot. Make sure that the filter side marked “Front Side” faces the front of the unit. 3. Stack the First-Stage filter (part # D2000PFC) on top of the Second Stage filter. Again, make sure that the filter side marked “Front Side”...
Need help?
Do you have a question about the D2000 and is the answer not in the manual?
Questions and answers