Room air purifier with patented smart e-filter (9 pages)
Summary of Contents for Clean Air AtmosAir Everest
Page 1
Installation and Operation Manual Everest OUR MISSION IMPORTANT To improve health and wellness by actively restoring indoor air Save this Document to its pure, natural state where no pollution or contaminants for Future Reference & AtmosAir.com exist, while reducing energy use and emissions in the process. Warranty Information CAG-06-21-001...
Page 2
Installation and Operation Manual Everest About AtmosAir AtmosAir Solutions of Fairfield, CT is a leader in solutions for healthier indoor air. An active and transparent approach to pioneering solutions for indoor air quality is something AtmosAir has been doing for nearly two decades –...
Installation and Operation Manual Everest 01 HOW IT WORKS Bi-Polar Ionization System Antibacterial Filter The Bi-Polar Ionization system is an air purification The Antibacterial Filter can target contaminants such feature that releases a significant amount of positive and as bacteria, spores, and other microorganisms and help negative air ions.
Installation and Operation Manual Everest 02 PRODUCT OVERVIEW Top Side Control Panel Control Panel Handle Air Outlet Front Panel Air Inlet Air Inlet Side View Rear Side Display Panel Circuit Diagram Front Panel remove switch Anti fall off switch Fuse Live wire UV Lamp Neutral wire...
Installation and Operation Manual Everest 03 INSTALLATION PROCEDURES Remove filter from the machine Open the cover Take out the filters Remove all packaging material Install filter and front panel Install filter 3 (Antibacterial & Install filter 2 (Cold Catalyst Install filter 1 (Pre-filter). Install front panel HEPA compound filters).
Installation and Operation Manual Everest 04 EVEREST CONTROLS OVERVIEW Power On/Off UV Sterilizer Auto Mode Fan Speed Sleep Mode Timer Set Bi-Polar Child Lock Ionization Display Panel Switch On Pressing the auto button puts the device into auto mode and an auto indicator displays on Press the power button to power on the device.
Installation and Operation Manual Everest 05 SETTINGS For child lock mode: Press the child lock button to Remote Control disable the device control panel and the buttons on the remote control. To lift child lock, press and hold The device is equipped with a remote this button for 3 seconds, or press the unlock button control.
Installation and Operation Manual Everest 06 PRODUCT PLACEMENT Do not place the unit in any of the following places: Areas with direct sunlight, areas facing air conditioner outlets, or areas facing heated areas. This may cause deformation, deterioration, discoloration, and malfunction of the product. Please put device 1 meter (3 feet) or more away from televisions, radios, and other appliances nearby.
Installation and Operation Manual Everest 07 SAFETY PRECAUTIONS 1. Do not lift or move the device while it is operating. Never pull 7. This device is not intended to replace on the cord when moving or storing as this may cause a short- cooking hoods or industrial type circuit, damage to the power cord, fire, or electric-shock injury.
Centers for Disease Do not use a damaged plug or loose power socket. Control and Prevention (CDC). Clean Air Group does not maintain that its products will protect people from all modes of transmission of...
Installation and Operation Manual Everest 09 CLEANING AND MAINTENANCE Pre-Filter Bi-Polar Ionization System (Recommended Clean, every 15 days) (Recommended Clean, as needed) Use a vacuum cleaner to clean the dust If the device produces a creaking sound, use a from the surface of the screen, or wash brush pen as a cleaning tool.
Installation and Operation Manual Everest 10 FILTER REPLACEMENT PROCEDURES There is a filter change indicator light that will illuminate when the filters need replacing. After replacing the filters, press and hold the child lock for 5 seconds to reset the indicator. Snap Joints A.
Installation and Operation Manual Everest 11 TROUBLESHOOTING Problem Solution 1. Is the power cord plugged in? If not, plug in the power cord. 2. Is the device front plate covered? If not, cover the front plate. 3. Is the device in child lock mode? When the display shows “child lock” lights, The unit does not turn on or the key press the “child lock/reset”...
(27) months from the date of Clean Air Group’s delivery of the product, whichever occurs first, Clean Air Group shall repair or replace the product without charge to the Customer. Proof of malfunction and return of the non- working product must be presented by the Customer if submitting a warranty claim.
Need help?
Do you have a question about the AtmosAir Everest and is the answer not in the manual?
Questions and answers