Understanding Beer Temperature; Understanding The Temperature Control Setting; Normal Operating Sounds - Haier BrewMaster HBF205E User Manual

Dual tap beer dispenser

Hide thumbs Also See for BrewMaster HBF205E:

Table of Contents

Available languages

English

Understanding Beer Temperature

• The recommended temperature for serving chilled beer is between 34˚ and

38˚F. To maintain this temperature in average room conditions of 70˚F, set the

thermostat to "Normal."

Note: During the summertime when temperatures are warmer, we recommend

that you adjust the control to a cooler setting accordingly.

• Select and maintain the proper temperature inside the refrigerator cabinet.

This is necessary for maintaining the flavor freshness of beer.

• The best temperature for storing a keg is between 38˚ and 40˚F.

• Excessively cold or warm temperatures inside the refrigerator cabinet may

cause a loss of flavor.

The temperature control is located at the rear of the unit on the

bottom left-hand corner. After turning the unit on, you must wait

24 hours for the unit to cool properly. You may then adjust the

temperature setting based on your needs and preferences.

Automatic Defrosting

It is not neccessary to defrost the beer dispenser/refrigerator. Ice that has

deposited on the evaporator is automatically defrosted when the compressor

cycles off. The defrosted water collects in the water collection tray at the rear

of the unit and evaporates.

Understanding Normal Operating Sounds

• Bubbling or gurgling sounds and slight vibrations are the result of the

refrigerant circulating through the cooling coils.

• Sizzling or popping sounds occur during the automatic defrost cycle.

• Dripping sounds occur as ice melts from the evaporator and flows into the

water collection tray during the automatic defrost cycle.

• Cracking or popping sounds are caused by the expanding and/or contracting

of the cooling coils during the automatic defrost cycle.

Table of Contents

Table of Contents