Page 1
All manuals and user guides at all-guides.com Beyond Navigation CR-Q1100P GPS Tracking recorder Quick Start Guide...
Page 2
Start to Use CR-Q1100P Operation Press and hold Power button for two seconds to power on CR-Q1100P, the buzzer will make 1 beep sound each time you power on CR-Q1100P. The Non-working LED will be ON (Red) and waiting for device to acquire satellite signals. CR-Q1100P is for outdoor use, we strongly recommend using it outdoor under open sky environment for better satellite reception.
Page 3
Device enters into sleeping mode (Once Vibration sensor is On status) CR-Q1100P Power Off Under Power on status, press power button for three seconds to turn off device. CR-Q1100P LED will be all off after device is power off. CR-Q1100P software utility operation Please install the software ( QTravel™, DataViewer™) and USB driver to your computer...
Page 4
When I use QTravel CR-Q1100P will not log invalid GPS data (GPS with no fix). So please make sure to log valid GPS SW to read log from data under open sky environment. If the device still cannot log, please perform a reset in device, it appears "No...