Samsung DVD-A500 Service Manual page 7

Precautions
1-5 Pick-up disassembly and reassembly
1-5-1 Disassembly
1) Remove the power cable.
2) Switch SW3 on deck PCB to "OFF" before
removing the FPC.
( Inserted into Main PCB CN6. See Fig. 1-4)
3) Disassemble the deck.
4) Disassemble the deck PCB.
Note : If the assembly and disassembly are not done in correct sequence, the Pick-up may be damaged.
OFF
1-6
All manuals and user guides at all-guides.com
SW3
ON
Fig. 1-4
1-5-2 Reassembly
1) Replace the Pick-up.
2) Assemble the deck PCB.
3) Reassemble the deck.
4) Insert FPC into Main PCB CN6 and switch SW3 on
deck PCB to "ON". (See Fig 1-4)
FPC
TO MAIN PCB
(CN6)
Samsung Electronics