Adjusting The Projected Image; Adjusting The Projector's Height And Projection Angle - ViewSonic X11-4K User Manual

Adjusting the Projected Image

Adjusting the Projector's Height and Projection Angle

The projector is equipped with one (1) adjuster foot. Adjusting the foot will change
the projector's height and the vertical projection angle. Carefully adjust the foot to
fine tune the projected image's position.
100% offset
NOTE: If the projector is not placed on a flat surface or the screen and the
projector are not perpendicular to each other, the projected image can
become trapezoidal. However, the "Auto Vertical Keystone" function will
correct the issue automatically.
1
2
115% offset
36
1
2
130% offset