Mitsubishi Electric PMFY Series Technical & Service Manual page 7

The main display can be displayed in two different modes: "Full" and "Basic".
The factory setting is "Full". To switch to the "Basic" mode, change the setting on the Main display setting.
<Full mode>
* All icons are displayed for explanation.
Cool
Mode
Operation mode
Indoor unit operation mode appears here.
Preset temperature
Preset temperature appears here.
Clock (See the Installation Manual.)
Current time appears here.
Fan speed
Fan speed setting appears here.
Button function guide
Functions of the corresponding buttons appear here.
Appears when the ON/OFF operation is centrally controlled.
Appears when the operation mode is centrally controlled.
Appears when the preset temperature is centrally controlled.
Appears when the fi lter reset function is centrally controlled.
Indicates when fi lter needs maintenance.
Room temperature
(See the Installation Manual.)
Current room temperature appears here.
Most settings (except ON / OFF, mode, fan speed, temperature) can be made from the Menu screen.
OC307E
Room
Set temp.
Auto
Temp. Fan
<Basic mode>
Fri
Cool
Mode
Appears when the buttons are locked.
Appears when the On/Off timer or Night setback function is
enabled.
Appears when the Weekly timer is enabled.
Appears while the units are operated in the energy-save
mode.
Appears when the built-in thermistor on the remote control-
ler is activated to monitor the room temperature.
appears when the thermistor on the indoor unit is acti-
vated to monitor the room temperature.
Indicates the vane setting.
Indicates the louver setting.
Indicates the ventilation setting.
Appears when the preset temperature range is restricted.
7
Fri
Set temp. Auto
Temp. Fan