Temperature Shut-off Valve
5.0
Technical Data
•
Inlet Pressure Rating......................4400 psi (303 BAR)
•
Outlet Pressure Rating ...................250 psi (17 BAR)
•
Trip Point (Standard)......................120
Optional Set Points
•
Max. Temperature Rating.................250
•
C
............................................... 0.21
V
•
Wetted Materials ........................... 316 Stainless Steel
•
Optional Position Indicating Dry Contact... P/N 4-05144A
•
Configuration ...........................SPDT (form C) (NOHC as used)
•
Enclosure .............................. NEMA 3, 4, 13 & IEC IP-67
•
Terminations ........................... Screw Type
•
Estimated Life ........................ 500K operations
•
Contact Rating ........................ 5A-125AC, 250VAC
Failure or improper selection or improper use of this product can cause property damage,
Due to the variety of operating conditions and applications for this product, the user, through it's own
analysis and testing, is solely responsible for making the final selection and assuring that all
performance, safety and warning requirements of the application are met.
All Sentry TSV's pass a rigid operational and leakage test before leaving the factory. This valve is
not user serviceable. If these instructions are not fully complied with, the product may fail and
cause damage to property or injury to persons. Sentry Equipment Corp cannot assume
responsibility for the performance of a customer serviced TSV.
SENTRY EQUIPMENT CORP • 262.567.7256 • Fax: 262.567.4523 • sales@sentry-equip.com • www.sentry-equip. com
O
F (49°C)
104°F (40°C)
153°F (67°C)
109°F (43°C)
194°F (90°C)
140°F (60 °C)
203°F (95°C)
160°F (71°C)
210°F (99°C)
O
F (121°C)
Viton, Peek
5A-30VDC resistive
4A-30VDC inductive
0.5A-125VDC resistive
0.4A-125VDC inductive
personal injury and death.
SPD 13.1.2 Rev. 7
4