Download Print this page

Warranty Conditions & Limitations - Sentry TSV Installation, Operation And Maintenance Manual

Temperature shut-off valve

Advertisement

Temperature Shut-off Valve
6.0
Warranty
Seller warrants products manufactured by it and supplied hereunder to be free from defects in
materials and workmanship for a period of twelve months from date of shipment. If within such
period any such products shall be proved to Seller's satisfaction to be defective, such products
shall be repaired or replaced at Seller's option. Seller's obligation and Buyer's exclusive remedy
hereunder shall be limited to such repair and replacement and shall be conditioned upon Seller's
receiving written notice of any alleged defect within 10 days after its discovery and, at Seller's
option, return of such product to Seller, ex-works Sentry's factory.
The foregoing warranties are exclusive and in lieu of all other express and implied warranties
except in title, including but not limited to implied warranties of merchantability and fitness for
purpose. Seller shall not be subject to any other obligations or liabilities whatsoever with respect
to products manufactured or furnished by it, or any undertakings, acts or omissions relating
thereto.
Warranty Conditions & Limitations
This Warranty shall not apply to any Sentry product which, in the opinion of Sentry Equipment
Corp, has been (a) altered or repaired in a manner affecting the efficiency of performance of the
unit or (b) incorrectly installed or operated or (c) damaged in shipment or (d) damaged by flood or
fire or (e) if the serial number is missing, altered or defaced.
The owner shall be responsible for maintenance of his equipment. Wear or damage caused by
lack of normal maintenance or by misuse of the equipment shall not be considered as defective
workmanship and material.
Sentry reserves the right to make product design changes or improvements without notice and
without imposing any obligation upon itself to install these changes or improvements on its
products previously manufactured.
This warranty is for the sole benefit of the original purchaser and is not transferable unless agreed
to in writing by Sentry Equipment Corp.
Receiving Shipments (including loss or damage by transportation)
It is the customer's responsibility to check for missing cartons and sign of damage to cartons. If
found, customer should note missing and/or damaged cartons on the delivery receipt and have
delivery receipt signed by the representative of the transportation company. If unpacking
discloses concealed damage from rough handling, the customer should request a concealed
damage inspection from the transportation company.
The Sentry Customer Service Department will aid your organization in any claim proceeding for
shortages or damages in shipment, but it is the receiver's responsibility to file claim with the
carrier for damage or loss.
SENTRY EQUIPMENT CORP • 262.567.7256 • Fax: 262.567.4523 • sales@sentry-equip.com • www.sentry-equip. com
SPD 13.1.2 Rev. 7
5

Advertisement

loading