Table of Contents
Advertisement
Power Management Setup
This page sets up some parameters for system power management operation.
Main
Advanced
Power Management Setup
Resume By PME
Resume By USB 1.x/2.0(S3)
EUP Function
Resume By PME (Disabled)
This item specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or components is
detected.
Resume By USB 1.x/2.0(S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
EUP Support (Disabled)
This item allows user to enable or disable EUP support.
Press <Esc> to return to the Advanced Menu page.
Chipset
Boot
Security
About Resume By
PCI/PCI-E/LAN/Ext. USB3.0
Disabled
PME
Disabled
Disabled
/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Using BIOS
Exit
: Select Screen
31
Advertisement
Table of Contents
