Page 2
Trust 56K V92 PC-CARD Modem Thank you Thank you very much for purchasing this product from the Trust range. We wish you hours of fun with it. Please read this manual carefully before using the product. Registration Register your purchase via our Internet site at www.trust.com...
Trust 56K V92 PC-CARD Modem Contents Introduction ............................2 V92 standard..........................2 Conventions used in the manual....................2 Contents of the box........................2 Minimum system requirements ....................3 Safety..............................4 General information ........................4 Modems............................4 Installation ............................5 Removing old drivers and applications ..................5 Installing the hardware .........................
PCMCIA modem gives you a fast connection for Internet and e-mail use. The SuperVoice software provided also makes the Trust 56K V92 PC-CARD Modem ideal to use as a fax machine or, when used in combination with your sound card, as a speaker telephone.
Trust 56K V92 PC-CARD Modem Minimum system requirements • Pentium 100 processor • 16 MB RAM • PCMCIA 2.1 type 2 Card slot • 16 MB free hard disk space • CD-ROM drive • Windows 95, Windows 98, Windows ME, Windows NT4, Windows 2000 or Windows XP...
Carefully read the following instructions before use: General information The Trust 56K V92 PC-Card Modem does not require any special maintenance. Use a slightly damp, clean cloth to clean the casing. Do not use aggressive substances, such as petrol or white spirit, to clean the device. These may harm the material.
Follow the instructions below to install the Trust 56K V92 PC-CARD Modem: Insert the Trust 56K V92 PC-CARD Modem into a free PCMCIA slot type II or III on your system. Connect the telephone cable provided to the connection on the rear of the modem.
2. Insert the CD-ROM containing the driver and applications into your CD-ROM drive. 3. The Trust Software Installer will start automatically. If it does not start automatically, go to ‘Start – Run’ and type [D:\Setup.exe] in the command line. Next, click on ‘OK’ (see figure 1).
Page 9
Trust 56K V92 PC-CARD Modem Figure 3: Searching for the modem 8. After the modem has been located, fill in your personal information and click on 'Proceed' (see figure 4). Figure 4: Inputting your personal information 9. A 'PIC Fax Printer' will be added after the installation. Click on 'OK' (see figure 5).
4. Use Testing the modem Test the functionality of the Trust 56K V92 PC-Card Modem before using it. You can do this by viewing the PCI modem’s diagnostic information. Follow the instructions below to test the functionality: 1. Go to 'Start - Settings – Control Panel’ and double-click on the 'Modems' icon.
5. Conditions for achieving a 56K connection Under certain conditions, your Trust 56K V92 PC-Card Modem can receive data at a maximum speed of 56,000 bits per second. If a 56,000 bps connection is not possible, the modem will automatically switch to a lower speed.
Trust 56K V92 PC-CARD Modem 6. Troubleshooting Problem Cause Possible solution The modem There is an IRQ or I/O conflict. Try other settings for the IRQ or COM port. does not react. The IRQ is shared. Go to the HaM modem properties window and in the ‘Preferences’...
Page 13
FAQ’s and the latest drivers. You will be automatically informed of developments to your product and other Trust products. You will also have the chance of winning some spectacular prizes. If you still have problems after trying these solutions, please contact one of the Trust Customer Care Centres (see the table at the back of this instruction manual).
Trust 56K V92 PC-CARD Modem 7. Trust Customer Care Centers www.trust.com Residents in the UK and Ireland should contact: From UK Office 8:00 - 16:00 Phone +44-(0)0845-6090036 +44-(0)1376-514633 I residenti in Italia possono contattare: Orario: Ufficio italiano 9:00 - 13:00 /...
Need help?
Do you have a question about the 56K V92 and is the answer not in the manual?
Questions and answers