Layout And Items Supplied - EINHELL TC-SM 2131/2 Dual Original Operating Instructions

•
Adopt a safe working position for your
work to ensure that neither of your hands
could come into contact with the saw bla-
de if they suddenly slip.
•
Always stand to the side of the saw blade
when working.
Caution! Take extra care when making double
miter cuts.
•
To rectify faults or remove jammed pieces
of wood, always switch off the machine
first. Always pull out the power plug (or take
out the rechargeable battery).
•
Be sure to observe the safety information
and operating and maintenance instruc-
tions issued by the manufacturer, as well
as the maximum workpiece dimensions
listed in the technical data.
•
Be sure to observe the accident preven-
tion regulations in force in your area as
well as all other generally recognized ru-
les of safety. If you are inexperienced in the
use of the machine, you can seek the advice
of a qualified professional or attend courses
to become trained in using the machine.
Keep the safety information and original ope-
rating instructions in a safe place and pass
them on with the machine if you hand the
machine on to another person.
Special information about the laser
Caution! Laser radiation
Do not look into the beam
Laser class 2
VORSICHT ! - LASERSTRAHLUNG !
Nicht in den Strahl blicken!
Laserspezifikation
Laser Klasse 2
: 650 nm; P
•
Never look directly into the laser path.
•
Never direct the laser beam at reflecting
surfaces or persons or animals. Even a low
output laser beam can inflict injury on the eye.
•
Caution: It is vital to follow the work proce-
dures described in these instructions. Using
the equipment in any other way may result in
hazardous exposure to laser radiation.
•
Never open the laser module.
Anl_TC_SM_2131_2_Dual_EX_UKCA.indb 13 Anl_TC_SM_2131_2_Dual_EX_UKCA.indb 13
GB
0
- 13 -
•
It is prohibited to carry out any modifications
to the laser to increase its power.
•
The manufacturer cannot accept any liability
for damage due to non-observance of the
safety information.

2. Layout and items supplied

2.1 Layout (Fig. 1-17)
1. Handle
2. On/Off switch
3. Release lever
4. Machine head
5. Saw shaft lock
6. Adjustable blade guard
7. Saw blade
8. Clamping device
9. Locking screw for stop rail
10. Workpiece support
11. Fixed stop rail
12. Table insert
13. Adjustable foot
14. Locking screw
15. Pointer (turntable)
16. Scale (turntable)
17. Turntable
18. Fixed saw table
19. Scale (miter)
20. Pointer (miter)
21. Locking lever
22. Sawdust bag
23. Discharge opening
24. Locking screw for drag guide
25. Retaining pin
26. Adjustment screw for stop 90°
27. Knurled screw for cutting depth limiter
28. Stop for cutting depth limiter
29. Adjustment screw for stop 45° to the left
30. Adjustment screw for stop 45° to the right
31. Flange bolt
32. Outer fl ange
33. Button
34. Adjustable stop rail
35. Laser
36. Removable stop rail
37. On/Off switch for laser
38. Transport handle
39. Socket head screw 5mm for workpiece sup-
port
40. Hex key 5mm
41. Hex key 6mm
42. Adjustment screw for stop rail
43. Cover plate
30.09.2021 08:28:35 30.09.2021 08:28:35