Table of Contents
Advertisement
these pages are current at the time of printing. however, in the spirit of improvement, we may make changes
to the electrical systems of future machines. study this diagram carefully. if you notice differences between
your machine and these wiring diagrams, call technical support at (570) 546-9663 for assistance.
Electrical Safety instructions
1.
PRiNtED iNFORMatiON. the electrical
information included in this section is current
at the time of printing. however, in the spirit
of improvement, we may make changes to
the electrical system of future machines.
study the photos and diagrams in this
section carefully. if you notice differences
between your machine and these diagrams,
call technical support at (570) 546-9663 for
assistance.
2.
ciRcuit REQuiREMENtS. you Must
follow the circuit requirements given on
Page 11 or 12. if you are unsure about
the wiring codes in your area or you plan
to connect your machine to a shared cir-
cuit, consult a qualified electrician.
Model g1095/g1096 1-hp power Feeder
SEctiON 7: WiRiNG
NOTICE
the photos and diagrams included in this
section are best viewed in color. you can view
these pages in color at www.grizzly.com.
3.
SHOcK HazaRD. disconnect the power
from the machine before servicing electri-
cal components. touching electrified parts
will result in personal injury including but
not limited to severe burns, electrocution, or
death.
4.
MOtOR WiRiNG. the motor wiring shown
in these diagrams are current at the time of
printing, but it may not match your machine.
Always use the wiring diagram inside the
motor junction box.
5. EXPERiENciNG DiFFicuLtiES. if at any
time you are experiencing difficulties under-
standing the information included in this
section, contact our technical support at
(570) 546-9663.
-25-
Advertisement
Table of Contents
