Inventory - Grizzly G1095/G1096 Owner's Manual

inventory

the following is a description of the main compo-
nents shipped with your machine. lay the compo-
nents out to inventory them.
Note: If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully. Occasionally
we pre-install certain components for shipping
purposes.
box inventory (Figures 4 & 5)
a. power Feeder Assembly ............................ 1
b. lubricator.................................................... 1
c. Base and Column Assembly ...................... 1
D. elbow Joint Assembly ................................ 1
E. Base Bolt pattern template ........................ 1
F.
handwheel handle ..................................... 1
G. horizontal Column Assembly ..................... 1
SuFFOcatiON HazaRD!
immediately discard all plas-
tic bags and packing materi-
als to eliminate choking/suf-
focation hazards for children
and animals.
-14-
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Qty
Figure 4. power feeder inventory.
Figure 5. support and base inventory.
Model g1095/g1096 1-hp power Feeder
A
C
d
e
g
B
F