Table of Contents
Advertisement
1
Always wear safety goggles or safety
glasses
with
side
shields
operating the product. Wear non-slip,
heavy-duty protective gloves. Wear
non-skid, protective footwear that will
protect your feet and improve your
footing on slippery surfaces.
6
Hand-tighten the bolts, then tighten
them securely with a hex nut using a
hex key or wrench.
8
Getting started
2
2
3
Loosen and remove the nuts and bolts
when
using a hex key or wrench.
7
1
2
Connect the wire assembly of the right
handle to the exposed cable of the
motor controller in the power head.
Secure the wires by screwing the
terminals of the wire assembly and
the integrated nut on the power head
connector together until thumb tight.
3
1
2
Insert the right handle assembly on the
side with the exposed cable leading to
the motor controller in the power head.
Make sure that the holes on both sides
of the handle assembly are aligned.
8
Remove the quick-lock pin from the
auger.
1
2
Advertisement
Table of Contents
