Safety Information; Predetermined Breaking Point; Operating The Appliance - Bosch MUZ6MM Series Operating Instructions Manual

en
Always follow the operating instructions
for the base unit!
This appliance is designed for processing
normal quantities of food for domestic use
and is not suitable for industrial use.
The accessories are suitable for the food
processor MUM6N... The described optional
accessories are available from specialist
outlets.

Safety Information

Attach only completely assembled multi-blender
to the food processor.
Before attaching/removing the multi-blender,
wait until the drive has come to a standstill
(0/Off) and pull out the mains plug.
Operate the multi-blender in the indicated
operating position only.
While operating the appliance, never reach into
the filling shaft, use the pusher to push in the
ingredients. Risk of injury from sharp cutting
discs! Take hold of cutting discs by the edge
only.
To insert and remove the chopping blade,
take hold of it by the tapered lug only.
Risk of injury from sharp blades!
Keep children away from the appliance.

Predetermined breaking point

If an overload occurs, the disc holder
on the drive shaft breaks, thereby
protecting the drive from damage.
Spare part available from customer service.
Overview
Please fold out the illustrated pages
Fig. A
a Pusher
b Cover with filling shaft
Bowl
c
d Drive base
Chopping blade
e
Disc holder
f
Reversible slicing disc (thick/thin)
g
Reversible shredding disc (coarse/fine)
h
Grating disc
i
Robert Bosch Hausgeräte GmbH

Operating the appliance

Important information
Only when the multi-blender has
been completely assembled and the
cover rotated as far as the cover lug,
can the multi-blender be attached
to the food processor and operated.
If required, hold down the cover lug
with your thumb.
If using the blender drive of the food
processor, place the protective cover
on the unused drive for the bowl
(Fig. B3).
"
Thoroughly clean accessories before
using for the first time, see "Cleaning
and care".
Chopping blade
for mincing, puréeing, blending, cutting
and for making sauces and mixed drinks.
Figure B
"
Place the bowl on the base and rotate
all the way in an anti-clockwise direction.
Lug (1.) must engage in the slot (2.) on
the handle (Fig. B4).
"
Insert chopping blade, taking hold of it
by the tapered lug.
"
Add food to be processed.
"
Attach cover (note mark) and rotate in an
anti-clockwise direction as far as the cover
lug (1.). Cover lug must engage in the slot
(2.) on the handle (Fig. B7).
"
Place multi-blender on the drive, paying
attention to the mark. Rotate the bowl
as far as possible in an anti-clockwise
direction.
"
Set the rotary switch to the desired
setting.
"
More food can be added through the filling
shaft while the appliance is running.
5090 471 837 | 01.2008
5