Hitachi HX-CP1S08-0 Instruction Manual page 7

*1 Since additional information needs to be saved, available memory size is slightly smaller than nominal value.
*2 Data for Web visualization is stored in the source file memory.
*3 EtherCAT master function must be configured as stand alone. Do not configure other function with EtherCAT master function.
*4 The maximum number of Modbus-TCP client : 16
*5 File access is possible from user program and FTP client.
*6 The battery is option for realtime clock.
*7 It depends on the size of the user program.
*8 Security protection support functionalities on each device which constructs a system help to secure a required level of security on
the system. However, those are not things to protect the system completely from any kinds of security risk which is increased day
by day. Continuous security measure is needed to realize and maintain the required security level. We suggest you clarify the target
of the security protection on the system and take proper security measures, maintain the system.
*9 UL is not supported. Contact your local supplier for further information.
*10 Available on CPU Software version 3.5.13.40 or newer.
 Virtual controller Specifications (Hybrid model)
Items
Virtual controller for
application execution
Web server for
application
management
*1 Ethernet port which can connect to built-in Web server IF or HX-Studio differs depending on CPU Software version.
3.5.8.25: ETH3
3.5.13.40 or newer: ETH1, ETH2, ETH3
*2 The file size displayed on the PC may differ from the actual size which can be stored in the CPU because files are compressed in
the CPU. Please store the target files to an SD card or a USB memory and use it, if file size exceeds the area size.
*3 Available on CPU Software version 3.5.13.40 or newer.
*4 Supported up to 3-dimensional array.
Programming software
Adaptation means *1
Programming language
Number of
Virtual controllers
ROM size for application *2
Work RAM
Access port
IP address of application
Data sharing with
PLC program
Security protection
Supported browser
System information
display
Virtual controller
information display
Shared memory
information display
User management display
IDE for Hybrid model application
HX-Studio (DVD includes HX-CODESYS.)
Download from built-in Web server IF or from HX-Studio
C / C++
Max. 4 (selectable from 1, 2, 4)
SP8: 27MB
SP13: 19MB
(Referred files like Library files can be stored in SD card or USB memory)
Max. 512 MB (e.g.: 512x1, 256x2, 128x4)
Ethernet, SD card, Serial port (RS-485), USB host port
Masquerade, IP forward, Port forward
Read: Max. 5,000 variables, Max. size: 64 KB
Write: Max. 5,000 variables, Max. size: 64 KB
Variables to be shared are selected at HX-CODESYS. Those can be set as
RETAIN / PERSISTENT.
Supported data type:
BOOL, BYTE, USINT, SINT,
WORD, UINT, INT,
DWORD, UDINT, DINT,
LWORD, ULINT, LINT,
REAL, LREAL
ARRAY OF <Above data types> *3*4,
STRING *3
Certification / Cryptograph (IPsec)
HTML5 supporting browser (IE11 or newer, Edge38 or newer, Chrome53 or
newer, Firefox49 or newer)
Window to display system information
(1) Status display of virtual controller
(2) Configuration of virtual controller
(3) Operation (Start / Stop) of application
Data display and force of shared memory
Registration and delete of user information to access Web server IF
- 7 -
Specification
NJI-672B(X)