Global Industrial 292655 Instruction Manual

globalindustrial.ca
Instruction Manual
Customer Service
US: 1-800-645-2986
NOTE: This product must be installed by a certified electrician in accordance
with local codes.
NOTE: Please read the following instructions carefully prior to using this product.
NOTE: For general ventilating use only. Do not use to exhaust hazardous or
explosive materials and vapors.
NOTE: Fans are designed to boost only dry (ambient heated or cooled airflow in
duct conduits of forced air systems with temperatures between 50°F and 140°F.
WARNING: This device is made of sheet metal and must be grounded to a
recognized grounding system.
1. GENERAL PRECAUTIONS
1.1 If product is dropped or damaged, immediately contact
qualified service personnel (distributor or manufacturer) to
verify product operation.
Please comply with the following when using device:
-Do not touch device with moist or wet extremities.
-Do not allow the product to be operated by children.
1.2 Connect unit to the main electricity supply or electrical outlet
only if:
-Electrical voltage and frequency corresponds to those shown
on the rating plate.
-Main electricity capacity supply is powered sufficiently to
Manual de Instrucciones
Servicio de atención al Cliente
México: 01.800.681.6940
Inline Duct Fans
Models 292655, 292656, 292657, 292658, 292659
Important Instructions
Distribucion Industrial Globales S DE RL DE CF
Canada: 888-645-2986
operate unit at maximum power. If not, contact qualified
personnel.
1.3 Always turn off or disconnect product when not in use.
1.4 Prior to cleaning or maintenance, switch off and
disconnect unit from main electricity supply. Ensure fan
blade has stopped completely prior to handling.
1.5 If malfunction or anomaly of any type occurs, ensure
device is inoperable (turn off the switch and disconnect
from main electricity supply) and immediately contact
qualified service personnel.
1.6 If product requires removal, turn off the main network
circuit breaker and disconnect device.
1.7 This fan is professionally manufactured and complies with
current standards regarding electrical equipment.
1.8 Do not use unit at an ambient temperature greater than
149° Fahrenheit/65° Celsius
1.9 Do not allow product to be exposed to extreme weather
(rain, sun, snow, etc.).
1.10 Do not place the device or parts in water or liquids.
1.11 During cleaning or routine maintenance, verify device
condition.
1.12 To avoid the risk of fire, do not use the product near
flammable substances or vapors such as alcohol,
insecticides, gasoline, etc.
1.13 The air or fumes being extracted must be clean and free
1
Manuel d'instruction
Service à la clientèle
082516