Global Industrial 292791 User Manual

OUTDOOR RATED WORKSTATION FAN
CAUTION: Read and follow all instructions before operating
fan.Do not use fan if any part is damaged or missing.
WARNING:
- To reduce the risk of fire or electrical shock, do not expose
to water or rain.
- To reduce the risk of fire or electrical shock, do not use this
fan with any solid state speed control device.
- Do not operate any fan with a damaged cord or plug.
Discard fan or return to an authorized service facility for
examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route
cord under furniture or appliances. Arrange cord away
from traffic area and where it will not be tripped over.
- The appliance does not apply to be used in locations
where special conditions prevail, such as the presence of
a corrosive or explosive atmosphere (dust, vapour or gas).
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
- Children should be supervised to ensure that they do not
play with the appliance.
- To reduce the risk of injury to persons, install fan at least
2.1m(7 feet) above the floor.

VERY IMPORTANT SAFETY INFORMATION:

Always follow these instructions to avoid bodily injury.
DANGER: Do not submerge motor or allow motor to be
exposed to water. Personal injury and/or death could result.
WARNING: Risk of electrical shock------This fan is supplied
with a grounding conductor and GFCI type plug. To reduce
the risk of electrical shock, be certain that it is connected
only to a PROPERLY grounded receptacle.
Models
292791 / 292792
CAUTION
BEFORE ASSEMBLING FAN TO MOUNTING
BRACKET MAKE CERTAIN THAT THE
BRACKET SUPPORT WALL CAN SUPPORT
FAN.
WARNING: Electric shock hazards------may cause severe
personal injury or death. For your safety, turn off the
electrical power supply at the service entrance before
installing, moving, or servicing your fan to avoid any
possible electrical shock hazards. Never make adjustments
to the fan when in power is on. When plugging in fan,
adjusting head and changing speeds------NEVER stand in
water. This practice can result in a dangerous or even fatal
electric shock.
DANGER: Never handle the fan or motor with wet hands
or when standing on wet or damp surface or in water.
Fatal electrical shock could occur.
WARNING: Electric shock hazards------may cause severe
personal injury or death.
Do not under any circumstances remove the power supply
cord ground prong or ground fault unit.
For your personal safety, the fan must be grounded.
The fan is equipped with a power supply with ground fault
circuit interrupting device. Removal or tampering of power
cord will void warranty.
CAUTION: Read and follow all instructions before operating
fan. Do not use fan if any part is damaged.
Never use an extension cord to connect the fan to an outlet.
All installations must be made into a grounded outlet.
UNPLUG THE FAN WHEN NOT IN USE

RULE FOR SAFE OPERATION

Never insert fingers or any other objects through the grill
guard when fan is in operation.
Disconnect the fan when moving from one location to
another.
Disconnect the fan when removing guards for cleaning.
1
É