Connecting Your Monitor; Connecting The Displayport And Usb Cable - Dell P2423D User Manual

Connecting your monitor

WARNING: Before you begin any of the procedures in this section,
follow the Safety
NOTE: Dell monitors are designed to work optimally with Dell
supplied inbox cables. Dell does not guarantee the video quality and
performance if non-Dell cables are used.
NOTE: Route the cables through the cable-management slot before
connecting them.
NOTE: Do not connect all cables to the computer at the same time.
NOTE: The images are for the purpose of illustration only. The
appearance of the computer may vary.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect the DisplayPort or HDMI cable from your monitor to the computer.
3. Connect the USB upstream cable (shipped with your monitor) to an appropriate
USB 3.2 Gen1 port on your computer. (See
4. Connect the USB peripherals to the SuperSpeed USB 5 Gbps (USB 3.2 Gen1)
on the monitor.

Connecting the DisplayPort and USB cable

DP
│
32 Setting up the monitor
instructions.
USB
Bottom view for details.)
USB
DP