570Z PRX Series
Sprinklers
0'–15' (0–4,6m) Radius
Features
• Patented in-riser pressure
regulator
Maintains constant 30 psi
•
(2 Bar) outlet pressure
Eliminates misting and
•
fogging caused by pressures
above 30 psi (2 Bar)
Nozzle filter screen
X-Flow
™
shut-off device
In-riser pressure
regulator maintains
constant 30 PSI
outlet pressure
Zero-flush seal
prevents flushing
on pop-up
Optional
Check-O-Matic
(COM) seal
prevents low-head
drainage
Optional
side inlet on
non-Check-O-Matic
models only (not
illustrated)
• Patented X-Flow high-flow
shut-off device built into
the riser
Restricts water loss if the
•
nozzle is removed or
damaged, eliminating
potential erosion or
safety issues
Allows for nozzle and filter
•
replacement or maintenance
while the system is running
• PRX stamped on cap for
easy identification
• All bodies shipped with a flush
plug in place for ease of
flushing and riser pull up
• Zero-flush seal prevents
flushing on pop-up
• Retraction flushing clears debris
for reliable pop-down
• Side-inlet models available
on 6" (150mm) and 12"
(300mm) sprinkler bodies for
easier installation and
vandal resistance
• Non-side-inlet models available
on 6" (150mm) and 12"
(300mm) sprinkler bodies for
sandy soils or applications
prone to high-pressure surges
and spikes
• Check valve prevents low-head
damage and keeps laterals
charged with water (optional)
• Recycled water models
available—cap molded in
lavender-colored plastic for
permanent identification
Cap cover available for new
•
or existing installations
• Five-year warranty
Specifications
• Flow rate: 0.05–3.30 GPM
(0,2–17 LPM)
• Recommended operating
pressure: 30–75 psi (2–5,2 Bar)
• Maximum operating pressure:
75 psi (5,2 Bar)
•
1
⁄
" (13mm) female-threaded
2
inlet
• Dimensions:
Body diameter:
•
3
1
⁄
" (35mm) on 4P, 6P
–
8
and 6P-SI models
5
1
⁄
" (41mm) on 12P models
–
8
3
1
⁄
" (44mm) on 12P-SI
–
4
models
Cap diameter: 2" (50mm)
•
Side inlet: 4
3
⁄
" (120mm) from
•
4
the top of sprinkler to center
of side inlet
S p e c i f y i n g I n f o r m a t i o n
570X
XXX
Model
Pop-up Height
Z—Lawn Pop-up
4P—4" (100mm)
& High-pop
6P—6" (150mm)
S—Shrub
12P—12" (300mm)
Example: A 570Z PRX Series Sprinkler with a pop-up height of 6" (150mm)
with a side-inlet option, would be specified as: 570Z-6P-SI-PRX
3
3
• Check valve maintains up to 7'
(2,1m) elevation change
(optional on side-inlet models)
Notes: You must have a nozzle
screen or flush plug in place to
deactivate the X-Flow function.
Without either, there will not be
flow through the sprinkler.
570Z PRX not recommended for
use with PCD nozzles.
SI
PRX
COM
E
Optional
Optional
Optional
SI—Side Inlet COM—Check
E—Effluent
Valve*
*Available with non-side inlet only.
X-Flow is a trademark of The Toro Company.