Door Reversal - Iceking BU100.E Installation And Operating Manual

Door Reversal

To reverse the door you will need to tilt the appliance backward to access the
lower hinge which holds screws. Do not tilt the appliance more than 45 degrees
and do not lay the appliance flat on its side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Tools Required: Torx headed screwdriver, flat headed screwdriver and hexagonal
spanner or a socket driver.
1. Remove the 4 screw hole covers on the front of the appliance door at the top
and the bottom.
2. With the door closed remove the screws from the top and bottom hinges that
hold the appliance door to the hinges. Remove the screws from the top hinge first.
18