Instruction Manual [ Home use only / Warranty not included ] | H-300E Series CONTENTS Do not remodel it under any circumstances. Also, do not attempt to dismantle or repair it yourself. p.02 1. Precautions for Safe Use Do not insert any foreign objects such as a finger or iron pin into any crack or hole in the product p.03...
When using the product, be careful so that a tie, long Ingredients unable to be juiced necklace, scarf, etc. doesn’t get into the inlet. - Do not insert ingredients that cannot be juiced such Place this product on an even and stable surface for as sesame seeds, coffee beans, Chinese peppers, tree use.
4. Precautions Before Juicing 3. Power Switch Guide ※ If you have an allergy, make sure to select Before operating the product, press the power switch. proper ingredients for your body when preparing the ingredients. 작동스위치 정회전 ※ For the method of and notes on using the 정회전...
Page 6
4-1. Multi-screw ※ For dry and viscous ingredients, mix them with other ingredients for extraction. Remove the peel and stalks, and also remove seeds, if there are any. Root vegetables Carrots, beets, ginger, sweet potatoes, potatoes, garlic, etc. Wash the ingredients in running water to remove dirt and other foreign substances.
5. How to Assemble 01 01 ③ ④ ④ ①-1 ⑤ ⑤ ②-1 ②-3 ②-3 ⑤-4 ⑤-4 ⑤-2 ⑤-2 ⑥ ⑥ ⑤ ④ 01 Insert the Bottom part of multi-screw( ) into the chamber ( ), and insert the Top part ③...
6. Assembly and Disassembly of Silicone ※ Silicone packings are consumables that are recommended to be replaced once every 6 to 12 Juice Cap Packing months. They are available for purchase through the Customer Service Center. (The juicer may leak if the product is not assembled properly.) Extraction Packing After cleaning, insert in a way that the round...
8. When Multi-screw Stops During Use 01 Open the hopper cover. ① Press the lever of the hopper cover to open it. 01 01 Insertion of an excessive amount of ingredients may 작동스위치 정회전 damage the product. 정회전 02 Add ingredients only up to the limit mark of the hopper.
9. How to Disassemble and Clean ※ After the product stops operating completely, pull the power cord plug with dry hands. Even after the product is stopped, the motor will slowly come to a stop so wait about 3 seconds before detaching the chamber set.
Page 12
Check the following before asking for repair. For follow-up service and any inquiry 10. Before you may have while using the product, please contact our Customer Center, or equesting Repair homepage at http://www.globalhurom.com Check the manufacturer’s number or the number under the barcode when requesting for follow-up service or parts. 01.