Table of Contents
Advertisement
6.
Tap the device name/ID on the iOS/iPadOS device.
This starts connection. When connection completes, "Connected" will appear on the
recorder display.
7.
Press
twice.
This reopens to the Recording Screen.
NOTE
· If connection is not successful, move the device closer to the recorder or move both to a place
where nothing interferes with radio waves and start Q8n Control again. Confirm also that the
Bluetooth function of the iOS/iPadOS device can be used.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the Q8n Control and is the answer not in the manual?
Questions and answers