Advertisement
Completing the ERM Assembly
Installing and Connecting the
Battery Packs
1. Slide the battery packs into the chassis.
IMPORTANT: Leave the battery circuit breaker in the off position.
2. For each battery pack:
a. Take out the connector cover screw (1).
b. Remove the connector cover (2) and discard.
c. Replace the connector cover screw to secure the
sheet metal.
3. Secure the batteries to the chassis with the screws provided.
4. Connect the cables.
5. Flip the battery circuit breaker to the On position on the
following equipment:
a. The UPS
b. The ERM being installed
c. Any other ERM attached to the UPS
Attaching the Bezel
Attach the bottom front bezel using the screws supplied in the
ERM kit.
Advertisement
