Adjusting The Fork Hydrostop Ring; Adjusting Fork Compression - SHERCO 125 ST Owner's Manual

MAINTENANCE PROCESSES

Adjusting the fork Hydrostop ring

Adjusting fork compression

D
The Hydrostop ring determines how the shock
absorber behaves in end position and resistance to
C
the fork's impact.
- Remove the protection from the front brake disc
( p.88).
- Turn the adjustment element
far as it will go.
- Turn the adjustment element
number of rotations as set forth in the table below.
Standard
Turn clockwise to reduce shock absorption of the
Hydrostop ring; shock absorption in end position
and resistance to impact decrease.
Turn anticlockwise to increase shock absorption of the
Hydrostop ring; shock absorption in end position and
resistance to impact increase.
Adjusting shock absorption under compression
influences the fork's behaviour while sagging.
- Turn the adjustment element
far as it will go.
- Turn the adjustment element
the number of rotations as set forth in the table
below.
Standard
Turning anticlockwise reduces shock absorption
during sag, while turning clockwise increases shock
absorption.
clockwise as
C
anticlockwise the
C
2.5 rotations
clockwise as
D
anticlockwise
D
1.5 rotations
97